DTF Station Routines: Start and End of Day
DTF Station Routines: Start-Of-Day At the start of each day, verify that all ink levels are sufficient and confirm that the printer’s waste tank has adequate capacity. Before initiating your...
Whether you're looking for recommendations, how-to guides, or ways to improve your printing experience, we’ve got you covered with expert insights and practical solutions.
DTF Station Routines: Start-Of-Day At the start of each day, verify that all ink levels are sufficient and confirm that the printer’s waste tank has adequate capacity. Before initiating your...
If your PrismJET VJ48" or Mutoh VJ 1204 Printer is displaying a "NearFullWasteInkTank" or "FullWasteInkTank" message, it is time to replace the waste printer's waste fluid box.
Regularly Clean Print Bearing Raceways From time to time, the bearing raceways that the print head carriage travels on will need to be cleaned and lubricated to ensure proper carriage...
This post will cover the second set of Path Editing tools in your VE LXi or Flexi software including optimize by smooth arc, optimize by 3-point arc, make arc, reduce...
This post will cover the first 5 Path Editing tools found within your LXi software including: point selector, straighten points, round corner, sharpening corners, and optimize by curve. Each icon...
This post gives step-by-step instructions for installing additional fonts to be used by your LXi and Flexi software. When looking for fonts online, make sure that they are True Type...
This article explains how LXi and Flexi users can cleanup jagged edges on autotraced images to yield the cleanest cut possible. We begin at an assumption that the reader has...
This article instructs users of the Vinyl Express R-Series cutter on how to identify the port your cutter is assigned for R-Series cutters. Users of other cutters may find these...
The Q Series Driver will allow Q24-Q160; and Qe60-Qe60+ cutter/plotters to be recognized on Windows 32-bit operating systems. Download the file to a location you can find on your computer....
Contour Cutting Hints and Tips The first step to contour cutting is adding a contour line to your image. This line shows as a light gray color and does not...
Diagnosing and Cleaning Clogged Printer Nozzles Clogged printer nozzles are usually caused by one of two reasons. Head strikes Not using the printer or maintaining the printer properly. Cleaning Clogged Printer...