QHow-To

Sometimes you just have to go back to the defaults. In this article, you will...

If the contour cut is off from the printed image, you should first perform th...

It may seem that it will be overwhelming to try to restore language settings ...

This adjustment will set the cross cutter home position value. If you replace...

This article provides instructions for manually adjusting the mark sensor off...

Finding and Adjusting the ARMS Activation and Settings on Your Cutter This ar...

If you replace the Auto-registration mark sensor or the main board on your FC...

Here are the steps to assist you in calibrating the Mark Sensor position for ...

Skillful Contour Cutting with a 24 Inch Printer It is important to realize t...

Contour Cutting Hints and Tips The first step to contour cutting is addin...

Media Feeding Method: Roll-1, Roll-2, or Sheet If you have already loaded th...

The cross cut function is found on Q Series plotters (Q60, Q75, Q100, Q130, a...