Manually Adjusting the Mark Sensor Offset Position
This article provides instructions for manually adjusting the mark sensor offset for Graphtec cutters. What You Need to Know About Manually Adjusting the Cutting Position We are referring to the...
Support
Whether you're looking for recommendations, how-to guides, or ways to improve your printing experience, we’ve got you covered with expert insights and practical solutions.
-
-
Adjusting the Registration Mark Sensor Sensitivity
If you replace the Auto-registration mark sensor or the main board on your FC-8000 (Q24, 30, 42, 54, 64) you need to adjust the sensitivity. Adjusting the Auto-Registration Mark Sensor...
-
Adjusting the Cross Cutter Home Position for Vinyl Express Cutters
This adjustment will set the cross cutter home position value. If you replace the main board, use the following procedure to input the recorded adjustment values. How to Adjust the...
-
ARMS Activation and Settings for Cutters
Finding and Adjusting the ARMS Activation and Settings on Your Cutter This article will help owners of the FC8000 or Q-Series vinyl cutters (Q24, 30, 42, 54, and 64) with their...
-
Calibrating the Mark Sensor Position for Q-Series Cutters
Here are the steps to assist you in calibrating the Mark Sensor position for Q-Series Cutters: After replacing the Auto-registration mark sensor or the main board on the FC-8000 (Q24,...
-
Tool Carriage Arm Adjustment - R-Series Cutters
Master the Tool Carriage Arm Adjustment for Your R-Series Cutters A new R-Series vinyl cutter should arrive with the tool carriage firmly locked into the track on which it slides...
-
Identify the Port Your Cutter Is Assigned
This article instructs users of the Vinyl Express R-Series cutter on how to identify the port your cutter is assigned for R-Series cutters. Users of other cutters may find these...
-
Media Feeding Method: Roll-1, Roll-2, or Sheet
Media Feeding Method: Roll-1, Roll-2, or Sheet If you have already loaded the media into your cutter (Vinyl Express Q-Series; Graphtec CE and FC Series), the MEDIA TYPE menu appears....
-
Graphtec and Q-Series Cross Cut
The cross cut function is found on Q Series plotters (Q60, Q75, Q100, Q130, and Q160) and is designed to cut perfect edges for the first vinyl graphic cut and...
SHOP POPULAR BRANDS
