Manually Adjusting the Mark Sensor Offset Position
This article provides instructions for manually adjusting the mark sensor offset for Graphtec cutters. What You Need to Know About Manually Adjusting the Cutting Position We are referring to the...
Support
Whether you're looking for recommendations, how-to guides, or ways to improve your printing experience, we’ve got you covered with expert insights and practical solutions.
-
-
Adjusting the Registration Mark Sensor Sensitivity
If you replace the Auto-registration mark sensor or the main board on your FC-8000 (Q24, 30, 42, 54, 64) you need to adjust the sensitivity. Adjusting the Auto-Registration Mark Sensor...
-
Replacing Q-Series Pinch Rollers Can Be Easy
Replacing the Q-Series pinch roller on a Q-series cutter is easy in theory, but not always in practice. Full disclosure, the process can be a bit tedious. Still, with the...
-
Restore Language Settings on Q-Series and Graphtec Cutters
It may seem that it will be overwhelming to try to restore language settings on your Q-Series and Graphtec cutters, so we outlined the steps to help you! To change...
-
Adjusting the Cross Cutter Home Position for Vinyl Express Cutters
This adjustment will set the cross cutter home position value. If you replace the main board, use the following procedure to input the recorded adjustment values. How to Adjust the...
-
Installing a New Cutter Protection Strip
A cutter protection strips will wear out over time. The protection strip’s lifespan will also be shortened when the blade depth is set incorrectly and cutting through the material's backing....
-
ARMS Activation and Settings for Cutters
Finding and Adjusting the ARMS Activation and Settings on Your Cutter This article will help owners of the FC8000 or Q-Series vinyl cutters (Q24, 30, 42, 54, and 64) with their...
-
Calibrating the Mark Sensor Position for Q-Series Cutters
Here are the steps to assist you in calibrating the Mark Sensor position for Q-Series Cutters: After replacing the Auto-registration mark sensor or the main board on the FC-8000 (Q24,...
-
Troubleshooting Basic Vinyl Tracking Problems
A major reason for poor tracking is improper alignment of sign vinyl. Long runs will be impossible to accomplish without learning to load and align vinyl properly. Notice that there...
-
Downloading the Q Series Driver - Windows 32-bit
The Q Series Driver will allow Q24-Q160; and Qe60-Qe60+ cutter/plotters to be recognized on Windows 32-bit operating systems. Download the file to a location you can find on your computer....
-
Manually Adjusting the Mark Sensor Offset Position
This article provides instructions for manually adjusting the mark sensor offset for Graphtec cutters. What You Need to Know About Manually Adjusting the Cutting Position We are referring to the...
-
Adjusting the Registration Mark Sensor Sensitivity
If you replace the Auto-registration mark sensor or the main board on your FC-8000 (Q24, 30, 42, 54, 64) you need to adjust the sensitivity. Adjusting the Auto-Registration Mark Sensor...
-
Replacing Q-Series Pinch Rollers Can Be Easy
Replacing the Q-Series pinch roller on a Q-series cutter is easy in theory, but not always in practice. Full disclosure, the process can be a bit tedious. Still, with the...
-
Restore Language Settings on Q-Series and Graphtec Cutters
It may seem that it will be overwhelming to try to restore language settings on your Q-Series and Graphtec cutters, so we outlined the steps to help you! To change...
-
Adjusting the Cross Cutter Home Position for Vinyl Express Cutters
This adjustment will set the cross cutter home position value. If you replace the main board, use the following procedure to input the recorded adjustment values. How to Adjust the...
-
Installing a New Cutter Protection Strip
A cutter protection strips will wear out over time. The protection strip’s lifespan will also be shortened when the blade depth is set incorrectly and cutting through the material's backing....
-
ARMS Activation and Settings for Cutters
Finding and Adjusting the ARMS Activation and Settings on Your Cutter This article will help owners of the FC8000 or Q-Series vinyl cutters (Q24, 30, 42, 54, and 64) with their...
-
Calibrating the Mark Sensor Position for Q-Series Cutters
Here are the steps to assist you in calibrating the Mark Sensor position for Q-Series Cutters: After replacing the Auto-registration mark sensor or the main board on the FC-8000 (Q24,...
-
Troubleshooting Basic Vinyl Tracking Problems
A major reason for poor tracking is improper alignment of sign vinyl. Long runs will be impossible to accomplish without learning to load and align vinyl properly. Notice that there...
-
Downloading the Q Series Driver - Windows 32-bit
The Q Series Driver will allow Q24-Q160; and Qe60-Qe60+ cutter/plotters to be recognized on Windows 32-bit operating systems. Download the file to a location you can find on your computer....
-
Origin Point on Graphtec and Q-Series Cutters
The Origin Point is the position from which the machine will begin to cut when it receives a job command. Every time the cutter is initialized, the carriage should stop in front...
-
Recommended Settings for Q-Series and Graphtec Cutters
Let's review the recommended settings for Q-Series and Graphtec Cutters On the Q-Series, the settings we generally recommend when cutting regular vinyl (2-4 mil) are: Speed: 20 (This is up...
-
Pinch Roller Placement on Graphtec and Q-Series Cutters
Placement of the rollers to the outside edges of the material is important, not only because it improves tracking, but because the machine locates the pinch rollers during the initialization...
-
Proper Blade Depth Is Vital for Precision Cutting
Proper Blade Depth Is Vital for Precision Cutting  Blade Depth is how far the blade sticks out of the end of the blade holder and is a major factor...
-
Loading and Tracking on Graphtec and Q-Series Cutters
Proper Loading and Tracking on Graphtec and Q-Series Cutters Make sure your Graphtec and Q-Series Cutters are on a level surface. An unlevel surface can cause the roll of vinyl to...
-
Q-Series Driver - Windows 64-bit Operating System
Q-Series Driver - Windows 64-bit Operating System This Q-Series driver allows Q24-Q64; Q60-Q160; and Qe60-Qe60+ cutter/plotters to be recognized on Windows 64 bit operating systems. Download the file to a location...
-
Vinyl Express Q-Series User's Manual - 24, 30, 42, 54, and 64 models
Download the Vinyl Express Q-Series User’s Manual to learn basic operations, ideal settings, and more about our professional ARMS system.  (This manual is for Q24/ Q30/ Q42/Q54/ Q64 models.)
-
Auto Pre-Feed Feature in Q Series and Graphtec Plotters
The most common problem with friction-fed plotters is tracking. How do you make sure that when you load your vinyl for a 20 foot banner or custom pinstriping job, your...
No results found for "". Check the spelling or use a different word or phrase.
SHOP POPULAR BRANDS
