Whether you're looking for recommendations, how-to guides, or ways to improve your printing experience, we’ve got you covered with expert insights and practical solutions.
Q-Series Vinyl Cutters Basics  Contour Cutting Q/A Cutter Protection Strip Pinch Roller Placement on Graphtec and Q-Series Cutters Loading and Tracking on Graphtec and Q-Series Cutters Origin Point on Graphtec...
This article provides instructions for manually adjusting the mark sensor offset for Graphtec cutters. What You Need to Know About Manually Adjusting the Cutting Position We are referring to the...
If you replace the Auto-registration mark sensor or the main board on your FC-8000 (Q24, 30, 42, 54, 64) you need to adjust the sensitivity. Adjusting the Auto-Registration Mark Sensor...
In this article, you will find the steps to resetting a Q-Series printer to the factory default settings..
On July 17, 2022 Microsoft pushed out a Windows 10 update that seems to have effectively broken the Vinyl Express USB driver. Affected customers began reporting a range of errors...
Vinyl Express Q Series Gen3 Support Resources Welcome to the Vinyl Express Q Series Gen3 vinyl cutter support resources page. Here you will find all the essential resources for setting...
Vinyl Express Q Series Gen3 Setup Video Click the thumbnail below to begin viewing the Q Series Gen3 setup video. The setup video will guide you through stand assembly, basic...
Replacing the Q-Series pinch roller on a Q-series cutter is easy in theory, but not always in practice. Full disclosure, the process can be a bit tedious. Still, with the...
What is Contour Cutting? Imagine printing a picture or drawing on a piece of paper and then cutting it out using a pair of scissors. A rushed job will probably...
If the contour cut is off from the printed image, you should first perform the Sensor Position Adjustment on the cutter. If the cut continues to be inaccurate you may...
SHOP POPULAR BRANDS
