Arlon Vehicle Wrap How-To Videos: A Valuable Resource for Every Installer
For both first-time installers and experienced vehicle wrap professionals, Arlon’s how-to videos provide a valuable resource for improving skills and achieving better results.
Support
Whether you're looking for recommendations, how-to guides, or ways to improve your printing experience, we’ve got you covered with expert insights and practical solutions.
-
Category Directory - R-Series Cutters
The R-Series category directory organizes what you need to properly operate your R-Series cutter. Find basics, downloads, how-tos, and more.
-
Random or Incomplete Cuts - R-Series
If your R-Series cutter is is making random or incomplete cuts, it's possible that it is receiving information too quickly to process. Make these changes for a more fluid transfer...
-
Adjusting the Cross Cutter Home Position for Vinyl Express Cutters
This adjustment will set the cross cutter home position value. If you replace the main board, use the following procedure to input the recorded adjustment values. How to Adjust the...
-
Loud R-Series Cutters Running Louder than Usual
Let's clarify. The R-Series has never been accused of being a quiet cutter. Still, there are times when first-time users are rightfully shocked by the loud noise coming from their...
-
Loading the Blade Holder on R-Series Cutters
We can help you successfully load the blade holder on R-Series cutters with our helpful guidance.
-
Video Support for R-Series Cutter Maintenance
This helpful video from SignWarehouse addresses some basic R-Series cutter maintenance considerations, including: blade, blade holder, Teflon strip and pinch rollers.
-
Installing a New Cutter Protection Strip
A cutter protection strips will wear out over time. The protection strip’s lifespan will also be shortened when the blade depth is set incorrectly and cutting through the material's backing....
-
Registration Mark Template for Graphtec Cutters
Download and print this Registration Mark Template to use in conjunction with the article: Manually Adjusting the Mark Sensor Offset for Graphtec cutters.
-
ARMS Activation and Settings for Cutters
Finding and Adjusting the ARMS Activation and Settings on Your Cutter This article will help owners of the FC8000 or Q-Series vinyl cutters (Q24, 30, 42, 54, and 64) with their...
-
Calibrating the Mark Sensor Position for Q-Series Cutters
Here are the steps to assist you in calibrating the Mark Sensor position for Q-Series Cutters: After replacing the Auto-registration mark sensor or the main board on the FC-8000 (Q24,...
SHOP POPULAR BRANDS
