Vinyl Express Qe6000 Driver Solution Is the Keyspan Adapter
On July 17, 2022 Microsoft pushed out a Windows 10 update that seems to have effectively broken the Vinyl Express USB driver. Affected customers began reporting a range of errors...
Support
Whether you're looking for recommendations, how-to guides, or ways to improve your printing experience, we’ve got you covered with expert insights and practical solutions.
-
-
Replacing Q-Series Pinch Rollers Can Be Easy
Replacing the Q-Series pinch roller on a Q-series cutter is easy in theory, but not always in practice. Full disclosure, the process can be a bit tedious. Still, with the...
-
Restore Language Settings on Q-Series and Graphtec Cutters
It may seem that it will be overwhelming to try to restore language settings on your Q-Series and Graphtec cutters, so we outlined the steps to help you! To change...
-
Adjusting the Cross Cutter Home Position for Vinyl Express Cutters
This adjustment will set the cross cutter home position value. If you replace the main board, use the following procedure to input the recorded adjustment values. How to Adjust the...
-
Installing a New Cutter Protection Strip
A cutter protection strips will wear out over time. The protection strip’s lifespan will also be shortened when the blade depth is set incorrectly and cutting through the material's backing....
-
Troubleshooting Basic Vinyl Tracking Problems
A major reason for poor tracking is improper alignment of sign vinyl. Long runs will be impossible to accomplish without learning to load and align vinyl properly. Notice that there...
-
Downloading the Q Series Driver - Windows 32-bit
The Q Series Driver will allow Q24-Q160; and Qe60-Qe60+ cutter/plotters to be recognized on Windows 32-bit operating systems. Download the file to a location you can find on your computer....
-
Media Feeding Method: Roll-1, Roll-2, or Sheet
Media Feeding Method: Roll-1, Roll-2, or Sheet If you have already loaded the media into your cutter (Vinyl Express Q-Series; Graphtec CE and FC Series), the MEDIA TYPE menu appears....
-
Origin Point on Graphtec and Q-Series Cutters
The Origin Point is the position from which the machine will begin to cut when it receives a job command. Every time the cutter is initialized, the carriage should stop in front...
-
Recommended Settings for Q-Series and Graphtec Cutters
Let's review the recommended settings for Q-Series and Graphtec Cutters On the Q-Series, the settings we generally recommend when cutting regular vinyl (2-4 mil) are: Speed: 20 (This is up...
SHOP POPULAR BRANDS
