Manually Adjusting the Mark Sensor Offset Position
This article provides instructions for manually adjusting the mark sensor offset for Graphtec cutters. What You Need to Know About Manually Adjusting the Cutting Position We are referring to the...
Support
Whether you're looking for recommendations, how-to guides, or ways to improve your printing experience, we’ve got you covered with expert insights and practical solutions.
-
-
Adjusting the Registration Mark Sensor Sensitivity
If you replace the Auto-registration mark sensor or the main board on your FC-8000 (Q24, 30, 42, 54, 64) you need to adjust the sensitivity. Adjusting the Auto-Registration Mark Sensor...
-
Rogue Training Videos from SignWarehouse
Get to know your Rogue vinyl cutter with these helpful Rogue training videos. View these Rogue training videos in order or use the playlist to navigate to the video most...
-
Answers to Your Contour Cutting Questions
What is Contour Cutting? Imagine printing a picture or drawing on a piece of paper and then cutting it out using a pair of scissors. A rushed job will probably...
-
Output Size Compensation for Contour Cutting
If the contour cut is off from the printed image, you should first perform the Sensor Position Adjustment on the cutter. If the cut continues to be inaccurate you may...
-
The Ease of Correcting Contour Cut Problems
Several factors help determine whether a contour cut will align properly with the object to which it is applied. Let's consider four adjustments we recommend to resolve misaligned contour cuts.
-
ARMS Activation and Settings for Cutters
Finding and Adjusting the ARMS Activation and Settings on Your Cutter This article will help owners of the FC8000 or Q-Series vinyl cutters (Q24, 30, 42, 54, and 64) with their...
-
Calibrating the Mark Sensor Position for Q-Series Cutters
Here are the steps to assist you in calibrating the Mark Sensor position for Q-Series Cutters: After replacing the Auto-registration mark sensor or the main board on the FC-8000 (Q24,...
SHOP POPULAR BRANDS
