Answers to Your Contour Cutting Questions
What is Contour Cutting? Imagine printing a picture or drawing on a piece of paper and then cutting it out using a pair of scissors. A rushed job will probably...
Support
Whether you're looking for recommendations, how-to guides, or ways to improve your printing experience, weāve got you covered with expert insights and practical solutions.
-
-
Installing a New Cutter Protection Strip
A cutter protection strips will wear out over time. The protection stripās lifespan will also be shortened when the blade depth is set incorrectly and cutting through the material's backing....
-
Origin Point on Graphtec and Q-Series Cutters
TheĀ Origin PointĀ is the position from which the machine will begin to cut when it receives a job command. Every time the cutter is initialized, the carriage should stop in front...
-
Pinch Roller Placement on Graphtec and Q-Series Cutters
Placement of the rollers to the outside edges of the material is important, not only because it improves tracking, but because the machine locates the pinch rollers during the initialization...
-
Proper Blade Depth Is Vital for Precision Cutting
Proper Blade Depth Is Vital for Precision Cutting Ā Blade Depth is how far the blade sticks out of the end of the blade holder and is a major factor...
-
Loading and Tracking on Graphtec and Q-Series Cutters
Proper Loading and Tracking on Graphtec and Q-Series Cutters Make sure your Graphtec and Q-Series Cutters areĀ on a level surface. An unlevel surface can cause the roll of vinyl to...
SHOP POPULAR BRANDS
