Q Series

This adjustment will set the cross cutter home position value. If you replace...

A cutter protection strips will wear out over time. The protection strip’s li...

Download and print this Registration Mark Template to use in conjunction with...

This article provides instructions for manually adjusting the mark sensor off...

Finding and Adjusting the ARMS Activation and Settings on Your Cutter This ar...

If you replace the Auto-registration mark sensor or the main board on your FC...

Here are the steps to assist you in calibrating the Mark Sensor position for ...

A major reason for poor tracking is improper alignment of sign vinyl. Long ru...

Skillful Contour Cutting with a 24 Inch Printer It is important to realize t...

The Q Series Driver will allow Q24-Q160; and Qe60-Qe60+ cutter/plotters to be...

Media Feeding Method: Roll-1, Roll-2, or Sheet If you have already loaded th...

The Origin Point is the position from which the machine will begin to cut whe...