The Ease of Correcting Contour Cut Problems
Several factors help determine whether a contour cut will align properly with the object to which it is applied. Let's consider four adjustments we recommend to resolve misaligned contour cuts.
Support
Whether you're looking for recommendations, how-to guides, or ways to improve your printing experience, we’ve got you covered with expert insights and practical solutions.
-
-
Restore Language Settings on Q-Series and Graphtec Cutters
It may seem that it will be overwhelming to try to restore language settings on your Q-Series and Graphtec cutters, so we outlined the steps to help you! To change...
-
Category Directory - Master Your Graphtec Cutters
Graphtec Basics Contour Cutting Q/A Cutter Protection Strip Pinch Roller Placement on Graphtec and Q-Series Cutters Loading and Tracking on Graphtec and Q-Series Cutters Origin Point on Graphtec and Q-Series Cutters...
-
Adjusting the Cross Cutter Home Position for Vinyl Express Cutters
This adjustment will set the cross cutter home position value. If you replace the main board, use the following procedure to input the recorded adjustment values. How to Adjust the...
-
Installing a New Cutter Protection Strip
A cutter protection strips will wear out over time. The protection strip’s lifespan will also be shortened when the blade depth is set incorrectly and cutting through the material's backing....
-
Registration Mark Template for Graphtec Cutters
Download and print this Registration Mark Template to use in conjunction with the article: Manually Adjusting the Mark Sensor Offset for Graphtec cutters.Â
-
ARMS Activation and Settings for Cutters
Finding and Adjusting the ARMS Activation and Settings on Your Cutter This article will help owners of the FC8000 or Q-Series vinyl cutters (Q24, 30, 42, 54, and 64) with their...
-
Calibrating the Mark Sensor Position for Q-Series Cutters
Here are the steps to assist you in calibrating the Mark Sensor position for Q-Series Cutters: After replacing the Auto-registration mark sensor or the main board on the FC-8000 (Q24,...
-
Troubleshooting Basic Vinyl Tracking Problems
A major reason for poor tracking is improper alignment of sign vinyl. Long runs will be impossible to accomplish without learning to load and align vinyl properly. Notice that there...
-
Contour Cutting - Print and Cut Helpful Hints
Contour Cutting Hints and Tips The first step to contour cutting is adding a contour line to your image. This line shows as a light gray color and does not...
SHOP POPULAR BRANDS
