Forever Multi-Trans has been the go-to solution for decorating hard surfaces with laser transfer printers for over 15 years. It produces excellent image quality and good abrasion resistance with CMYK printers on white substrates.
With the introduction of white toner printers like the OKI 711WT, Multi-Trans can now be used to decorate dark or colored objects. This is still a one-step, no-weed transfer paper, but, when used with white toner, the transfer is opaque and the color is more vivid.
For best results on hard surfaces like ceramics, use with a silicone pad.
- One step, general -purpose, self-weeding laser transfer paper for a variety of surfaces and hard items
- Items do not have to be coated or pre-treated for decoration
- Economical: toner and paper cost less than 80¢/sheet
- Fully compatible with iColor 500 and 600 LED laser transfer printers
- Acrylic Glass/Crystal
- Anodized metal
- Ceramic tile
- DyniSub/Unisub blanks
- Magnetic Vinyl
- Sealed wood
- Stainless steel bottles etc.
Print Directions: Set Media Type as Label or Label 2. Load paper into Multi-Bypass tray glossy side up. Print mirror image.
White Toner settings: For printing in CMW mode with TransferRIP software set the spot channel fill-up to 300 - 400% with a 2-device pixel setting.
Application Directions: Time temperature and pressure settings for this paper vary according to the substrate or item being decorated. Please refer to the instruction sheet for detailed directions.
Recommended Accessories: For best results on some flat substrates place a sheet of silicone Kraft paper between the item and the bottom platen of the heat press. Place a lightweight silicone pad over the transfer paper.