SISER TTD Easy Mask - Heat Transfer Mask
Sku:
Retail price:
Note:
Orders exceeding the stock on hand amount are processed as special orders, which require additional processing and shipping time and are not eligible for return.
Overview
Specs
Applications
Siser TTD Easy Mask is specifically designed for heat transfer vinyl or HTV. Unlike most traditional transfer tapes that are for adhesive vinyl, this heat transfer tape is designed to work with heat press application. No more scraping off adhesive tape residue with Siser TTD Easy Mask. Siser TTD Easy Mask is clear and thin, permitting accurate, beautiful placement of transfers for all your HTV projects.
Features:
- Designed for HTV material
- Prevents wrinkling and warping during the masking process
- Thin and transparent easily allows for the perfect placement
Note: Due to increased temperatures and humidity during summer months allow Siser TTD masks to return to room temperature for best performance; TTD Make can be placed inside fridge or freezer for 5-10 minutes.
Specifications:
- Designed for HTV material
- Prevents wrinkling and warping during the masking process
- Thin and transparent easily allows for the perfect placement
Applications Instructions:
- Print and contour cut image on Printable HTV. Weed excess vinyl.
- Cut a piece of TTD Easy Mask from roll a little larger than the transfer.
- Remove the paper release liner from the TTD Easy Mask.
- Place the mask on a smooth flat surface with the adhesive side facing up.
- With the image facing down, center it over the mask letting the middle drop down onto the adhesive, followed by the rest of the image.
- Place your squeegee at a 45 degree angle over the center of the image. Using firm pressure, push the squeegee towards the outer edge of the image. This removes any trapped air creating a bond between the image and the mask.
- Lift a corner of the mask, use a steady motion to separate the mask from the image
- Place the transferred image back on the shiny side of the original masking paper you had set aside. It is recommended to use a cold laminator for large production runs.
Note: Due to increased temperatures and humidity during summer months allow Siser TTD masks to return to room temperature for best performance; TTD can be placed inside fridge or freezer for 5-10 minutes.
