Overview
Applications
Video
- Polyurethane, ready-to-cut, custom garment decoration film
- 140 microns or 5.5 mil
- Peels WARM
- Layerable and an excellent choice for multi-color jobs
- Easy to apply due to low application temperatures
- Pressure sensitive carrier
- Medium pressure: 305° F for 10-15 seconds
- Lower pressure needed than other reflective HTV materials
- Laser Friendly
- CPSIA Certified
- Actual product width of EasyReflective is 19.68 inches.
Application Directions: Reverse cut EasyReflective Heat Transfer Vinyl with 45° blade. This is a WARM peel product. Weed excess material. Preheat garment in heat press at 305° F for 2-3 seconds. Position EasyReflective HTV application on garment and heat apply 305° F for 15 seconds on medium pressure. A teflon sheet should always be placed between the heat platen and the plastic carrier sheet to prevent sticking and edge damage to the transferred design. Peel carrier WARM.
Wash Instructions: Wait 24 hours before first wash. Turn garment inside out. Machine wash WARM or COLD with mild detergent. NO bleach. Dry at a normal dryer setting on household machines. Do NOT dry clean. Instructions apply to the material only. Please follow garment washing instructions as well.
For best results with layered graphics, always apply layers of like HTV product. For instance, EasyWeed on Easyweed. Mixing thermal transfer films in layered graphics may result in peeling of layers when the garment is laundered.
Check out our informative blog "A Basic Guide to Layering Siser Heat Press Vinyl" for flawless application every time.
Application Directions:
- Reverse cut with 45° blade.
- Weed excess material.
- Preheat garment in heat press or at 305° F for 2-3 seconds
- Position EasyReflective HTV application on garment and heat apply 305° F for 15 seconds on medium pressure. A teflon sheet should always be placed between the heat platen and the plastic carrier sheet to prevent sticking and edge damage to the transferred design.
- Peel Carrier Warm (wait at least 15 seconds)
Application Directions (Home Iron):
- Set iron setting between cotton and linen
- Cover heat transfer design with a heat transfer cover sheet of multipurpose paper
- Place on flat, hard surface (an ironing board is NOT recommended)
- Press iron with medium/firm pressure for 10-15 seconds
- If areas of design lift after application, replace cover sheet and re-press for 10 seconds
- Peel carrier warm
Wash Instructions:
- Wait 24 hours before first wash
- Turn garment inside out.
- Machine wash on warm or cold with mild detergent.
- NO bleach.
- Dry at a normal dryer setting on household machines.
- Do NOT dry clean.
- Instructions apply to the material only. Please follow garment washing instructions as well. Excellent durability, even after repeated washings.
Cutter Settings: Setting may vary based on blade condition and age of machine. Always do a test cut prior to cutting designs.
- Cricut - Blade: Standard; Setting: Iron-On
- Silhouette Cameo - Blade: Standard, 3; Material: Heat Transfer, Smooth; Speed: 8; Force: 6
- Brother ScanNCut - Blade: Standard, 2; Cut Speed: 1; Cut Pressure: 1
- Roland GS/GX-24 - Blade: 45°, Gram Force: 80-90; Offset: .250; Speed: 25-50 cm/s
- Graphtec - Blade: 45°; Force: 9-10; Tool: CB09U+0; Speed: 30 cm/s