Rapid Tac II was designed to work with a wider variety of films such as the economy calendered, intermediate calendered, high performance calendered, metallic, reflective, polyester, mylar and other specialty films). Rapid Tac II promotes bonding faster than the original Rapid Tac application fluid and is ideal for cold weather and glass application. Rapid Tac II is not a replacement for the Original Rapid Tac, and may bond too fast with Premium Cast films in warmer conditions.
- STEP 1. Clean surface thoroughly with Rapid Tac and a kitchen paper towel. Do not use other cleaners or solvents
- STEP 2. Spray surface again with Rapid Tac, peel backing off decal and place on wet surface
- STEP 3. Position decal. Use squeegee to remove fluid, using a good deal of pressure and working from the center out to the edges in all directions
- STEP 4. Wait 2 to 3 minutes. Saturate paper cover tape, if any, with Rapid Tac, then remove paper tape. Wipe surface with paper towel.
Note: (HM - shipped FEDEX Ground delivery only!)