Note:
Orders exceeding the stock on hand amount are processed as special orders, which require additional processing and
shipping time and are not eligible for return.
Cut a piece of mask slightly wider than the image to cover
Remove the paper backing from the mask and set aside
Adhesive side up, place the mask down on a smooth, firm surface
With the image facing down, center it over the mask letting the middle drop down onto the adhesive, followed by the rest of the image.
Place your squeegee at a 45 degree angle over the center of the image. Using firm pressure, push the squeegee towards the outer edge of the image. This removes any trapped air creating a bond between the image and the mask.
Lift a corner of the mask, use a steady motion to separate the mask from the image
Place the transferred image back on the shiny side of the original masking paper you had set aside. Recommend using Cold Laminator for large production runs
Rent equipment now. Pay later.
Fill out our quick application and we'll reach out to discuss more info and next steps. Hurry, spots limited!